Tuesday, 14 July 2015

UK astronaut Tim Peake announces shortlist for amateur radio contact with ISS

UK ESA astronaut Tim Peake.
Image: Steve Nichols
I wanted to be one of the first to break this news from Liverpool, especially as Norwich School is local to me. Congratulations to the school for making the shortlist for a two-way contact with Tim Peake when he is on his six-month mission to the International Space Station, currently targeted for December 2015 or later.

Here is the full announcement:

The shortlist of UK schools that will have the opportunity to contact British ESA astronaut Tim Peake via amateur radio during his mission to the International Space Station (ISS) has been revealed today at the UK Space Conference.

Tim will launch to the ISS in December of this year and will spend six months working and living in space. The Amateur Radio competition is a collaboration between the UK Space Agency, the Radio Society of Great Britain (RSGB) and the European Space Agency (ESA).

Selected schools will host a direct link-up with the ISS during a two-day, space-related STEM workshop which will be the culmination of a large range of learning activities using space as a context for teaching throughout the curriculum.

ARISS UK (Amateur Radio on the International Space Station) will provide and set up all necessary radio equipment such as low earth orbit satellite tracking antennas and radios, to establishing a fully functional, direct radio link with the ISS from the schools’ very own premises. In a ten-minute window when the ISS will be over the UK, an amateur radio contact will be established with Tim, and students will be able to ask him questions about his life and work on board the ISS.

Owing to the nature of scheduling the links, which is dependent on geography, the  exact orbit of the ISS and the crew schedules, the exact dates and times for possible links will not be known until 2 weeks before the link up is scheduled.  The shortlisted schools will all be prepared for such scheduling challenges and, by having a number of schools, we can ensure that all links are used. 

Jeremy Curtis, Head of Education at the UK Space Agency, said: “We’re delighted with the amount of interest in this exciting project and look forward to working with the selected schools as they make a call into space.

“Both Tim’s space mission and amateur radio have the power to inspire young people and encourage them into STEM subjects. By bringing them together we can boost their reach and give young people around the UK the chance to be involved in a space mission and a hands-on project that will teach them new skills.”

The following schools have been shortlisted for a possible ARISS call with Tim whilst he is in orbit on the ISS:
  • Ashfield Primary School, Otley, West Yorkshire
  • The Derby High School, Derby                   
  • The Kings School, Ottery St Mary               
  • Norwich School, Norwich
  • Oasis Academy Brightstowe, Bristol           
  • Powys Secondary Schools Joint, Powys  
  • Royal Masonic School for Girls, Rickmansworth          
  • Sandringham School, St Albans                
  • St Richard’s Catholic College, Bexhill-on-Sea 
  • Wellesley House School, Broadstairs        
John Gould, G3WKL, President of the RSGB, said: “The Radio Society of Great Britain will be delighted to support shortlisted schools by teaching their pupils about amateur radio and helping them through their licence exams where appropriate. Members of our Youth Committee are based across the UK and will be keen to visit the chosen schools in their area and chat to the pupils.”

The ARISS UK Operations team will now work with the shortlisted schools to prepare them for this exceptional opportunity during the mission of the first British ESA Astronaut.

Thursday, 9 July 2015

New "Spitfire" 20m Rockmite ][ QRP CW transceiver is born

Click to view larger image
I was walking around a local shop recently when I spotted a range of mints in tins from a company called Stewarts.

They are very attractive and feature paintings of a Supermarine Spitfire, a steam locomotive and a Triumph motorcycle.


At just £2.99 each the tins are cheap and cheerful, and I knew just what I wanted to do with one!

Hence, the plans for a 20m Rockmite ][ transceiver were born.

I have built a 40m Rockmite v1 before, which is a crystal-controlled ham radio transceiver offering about 0.5W output on two very close frequencies – you select each one by pressing a button. The Rockmite also has a built-in CW keyer with a speed control and is a very simple, but well-respected little radio.

The joy is they will fit in a mint tin, such as the famous Altoids. But the Stewart tins are much more attractive.

So, I ordered a 20m Rockmite ][ from Kanga kits (www.kanga-products.co.uk) in the UK (they are actually made by Rex Harper of QRPme.com in the US) and it arrived the next day.

The box is easy to work on as the material is very thin. I carefully took the lid off while I was working on it and wrapped the rest in masking tape to protect it and allow me to drill the holes. Quick tip – run a pencil around the lid when it is closed so that you can see on the tape where the lid will be when it is assembled. You can then measure and drill the holes for the antenna jack, power, key, headphones and frequency switch knowing that they won't bind on the lid.

Click to view larger image
I used a sharp, new 2.5mm drill for all the holes after marking them with a centre punch first. I then used a Dremel tool and needle files to open up the holes to the size needed. With hindsight I would have moved the PCB a little closer to the antenna side of the box to give more room, but I have now managed to put it all together.

The PCB build was simple, but I did end up with some spare components, which worried me! I didn't miss anything, so I thought they must be spares.

Dennis G6YBC of Kanga subsequently emailed and said: "Apologies if the spare parts (bits left over) confused you. I enclose all parts to complete the Rockmite ][ in either of ways that Rex explains i.e. with volume and speed control etc.

"This includes extra resistors for the various mods that he and Chuck have published. This includes the 3866 and 2N2222 transistors. All the above parts are part of the BOM as per the build instructions for Ver 3, but you also have to read the other sheets Rex publishes on his website."

I also had to modify the layout by cutting a track and adding a resistor, but that was easy.

I had the choice of a 2N2222A (TO-18) transistor or a 2N3866 (TO-5). I chose the latter as I presumed it would give a higher output – wrong, as we'll see later!

I also swapped the BNC for a phono socket to match the Mountain Topper Radio (MTR) I also have, which I have written about before.

By soldering on all the connectors I was able to test if on the bench first before boxing to make sure everything worked, which it did (that's unusual for me).

Powering up the the Rockmite gives a “73” in CW through the headphones, which is a nice touch. You can switch to a straight key by holding down one of the paddles or the key on power up. You can also change the speed by holding the button down for more than half a second and then using either paddle to speed it up or slow it down – the speed in WPM is enunciated in CW.

The first tests were a little disappointing as summer afternoons are not the best for 20m. But the evening and next morning showed the little receiver is very lively, picking up stations in the US, Switzerland, Germany, Czech Republic and others with a dipole at about 25ft.

The rig is actually on 14.0604MHZ and 14.0598MHz as far as I can see.

So does it transmit? Yes, but only about 200-250mW with a 12.4V supply. I think the output can be tweaked a little higher, say 500-700mW by reducing the value of the R18 resistor, but I need to check on that.

Needless to say, I haven't managed to work anyone on it yet – it is a little too QRPP for me! I was picked via the reverse beacon network in Germany and Ireland though.

All in all though, it is a pretty little radio with a very nice receiver around the QRP frequency of 14.060MHz. Next step is a 40m FOXX-3 transceiver in the steam train mint tin I think.

Update 10th July 2015
I put a quick CQ out last night and was picked up on the VE2WU skimmer in Quebec. That's pretty impressive! 

Update 30th November 2015
I replaced R18 with a 3 Ohm resistor and replaced the output transistor with a 2N5109 and am now getting 500mW. Happy with that  

Tuesday, 7 July 2015

Propagation maps updated until end of 2015

I had a bit of free time this morning and have now updated the HF propagation predictions maps for the UK through until the end of the year.

The original charts for July to December 2015 were from last year and were based on the smoothed sunspot numbers (SSNs) for that period. Now, they have been redrawn using the new predicted SSNs.

You can just pick the month you wish to look at at http://www.infotechcomms.co.uk/propcharts/

Also, please note that I now produce the weekly HF predictions for the RSGB's GB2RS service. These are also published online every Friday at: http://rsgb.org/main/news/gb2rs/

I write the HF section and John G4BAO and Jim G3YLA complete the VHF and up part of the broadcast. If there is anything you would like to see added or changed please let me know at steve[at]infotechcomms.co.uk